MODEL Product Description
TE200 Sensor assembly
TE500 Sensor assembly c/w transmitter (sensor type 12 is standard)

CODE Style
AP All purpose
B Duct mount
BB Duct probe with mounting bracket only
C Immersion
D Duct average (copper)
E Strap-on
F Outside air (OSA is pvc - no enclosure code required)
FD Duct average (flexible plenum rated cable)
G Glass
H Stack
HC Clip

CODE Enclosure (GES ABS enclosure is standard) CODE Flex Duct Only
- ABS enclosure, standard (no code required, leave blank) A Lead only, no box
M Metal utility box B ABS enclosure
R No box C Aluminum weatherproof box
W Aluminum weatherproof box D Metal box only

CODE Sensor
2 PT100-100 ohm Platinum, IEC 751, 385 Alpha, thin film
4 PT100-100 ohm Platinum, IEC 751, 385 Alpha, Wire-wound ceramic *(see below)
5 1801 ohm, NTC Thermistor¡À0.2¡ãC
6 3000 ohm, NTC Thermistor¡À0.2¡ãC
7 10,000 ohm, type 3, NTC Thermistor¡À0.2¡ãC
9 100,000 ohm, NTC Thermistor¡À0.2¡ãC
11 LM334 IC, l.0uA/¡ãC
12 PT1000-1000 ohm Platinum, IEC 751, 385 Alpha, thin film
20 20,000 ohm, NTC Thermistor¡À0.2¡ãC
21 LM335 IC, 10mv/¡ãC
24 10,000 ohm, type 2, NTC Thermistor¡À0.2¡ãC   

CODE

Probe Length

CODE

Copper Avg. (D)

CODE

Flex AVG. (FD)

A 50 mm (2") G 1800mm
(6')		 A 1800mm
(6')
B 100 mm (4") H 3600mm
(12')		 B 3600mm
(12')
C 150 mm (6") I 6100mm
(20')		 C 6100mm
(20')
D 200 mm (8") J 7300mm
(24')		 D 7300mm
(24')
E 300 mm (12")
F 450 mm (18")

CODE Probe Material (not required for F, FD, G, HC)
2 Stainless steel
3 Copper (rigid duct average only)

CODE Fitting (only required for immersion)
A Spring loaded 1/2" NPT
E Non-spring loaded 1/2" NPT

CODE TE500 Transmitter Power Supply
1 24 VAC/VDC

CODE TE500 Transmitter Output
A 4 - 20mA
D 0 - 5 VDC
E 0 - 10 VDC.

CODE TE500 Transmitter Range
1 0¡ãC - 35¡ãC (32¡ãF - 95¡ãF)
2 0¡ãC - 50¡ãC (32¡ãF - 122¡ãF)
3 0¡ãC - 100¡ãC (32¡ãF - 212¡ãF)
4 50¡ãC - 150¡ãC (122¡ãF - 302¡ãF)
5 50¡ãC - 250¡ãC (122¡ãF - 482¡ãF)
6 -50¡ãC - 50¡ãC (-58¡ãF - 122¡ãF)

Custom ranges available upon request.
TE200 D - 7 I 3 - - - -